Product Name: Bubble Free Slideable High Gloss Lizard Green Car Wrap Film
Product Description:
Car wrap film is a series of vinyl decals that are placed over the body panels of the vehicle, letting you drastically change its appearance. The design options include a standard glossy color, gradient color, matte finish, chrome metallic color, and full-on graphics treatments
Product Specfications:
| 1. Face Film | Type: | Polymeric Calendered Vinyl Film | Thickness: | 120 µm |
| Surface Finish: | Ultra Gloss | Color: | Peach Pink |
| 2. Adhesive | Type: | Clear Removable Acrylic Adhesive |
| Thickness: | 30 µm | Color: | Clear |
| 3. Liner | Type: | Air-Egress PE-coated Paper Liner | Thickness: | 140gsm |
| 4. Max Durability | Up to 5 years |
| 5. Product Size | Width | Length |
| (metric/m) | (Imperial/inch) | (Metric/m) | (Imperial/yard) |
| 1.27 | 50 | 18 | 20 |
| 1.52 | 60 | 23 | 25 |
| Notice: There is a Minimum Order Requirement for Special Product Size. |
Product Features:
- Very high gloss semi-conformable film
- Unique patented adhesive technology
- Outstanding durability and outdoor performance
- UV, temperature, humidity, and salt-spray resistance
- Excellent conformability around curves and recesses
- Good conformability to irregular substrates
FAQs:
- How Do You Maintain a Wrapped Car?
The best way to ensure a wrap will last is to keep the car in a garage. If you don't have a garage, invest in a good car cover. You should handwash the car with soft microfiber towels. Automatic car washes are off-limits: The harsh brushes could scratch or lift off the wrap.
- How to remove vinyl from your car?
1. Use your fingernail or plastic scraper to pull the wrap from the edges of the entire panel. It’s going to look gnarly, but it’ll all be gone in a few minutes.
2. Use the heat gun to evenly heat the surface of the wrap to about 120 °F (50 °C). This will loosen the adhesive so you can pull it off. Use a non-contact infrared thermometer to confirm you aren’t overheating, which can lead to excessive adhesive residue left on the surface.
3. Pull the wrap away from the edges at a steep angle, pulling the wrap back on itself at 15 to 20 degrees. When the wrap gets hard to pull, reheat and start pulling again.
4. Finally, use Turtle Wax Label & Sticker Remover or Bug & Tar Remover to remove any adhesive residue from the surface of the panel.
- Can I put my wrapped car through a car wash?
Hand washing is best for vinyl wraps, but brushless or touchless car washes can be just as safe. You can even use a pressure washer if you’re gentle.
Advantages of Applying Car Wrap Film:
- Expensive, color-matching paint fees are unnecessary for scratches or accident vehicles; just re-wrap the section that needs repair.
- It’s difficult to tell it’s not painted.
- Hides scratch, small chips, and “freshens” the look of your vehicle.
- Vinyl car wraps protect your OEM paint and are 100% removable.
- Many of the styles can not be reproduced by paint.
- Matte-paint jobs can be brittle and chip easily, while vinyl is more durable and harder to scratch. In the event that repairs are needed, the part that was damaged can be easily replaced, providing a perfect match.
- The cost for a vinyl vehicle wrap is considerably less (nearly half) than a comparable paint job.
- Warranties and/or lease agreements remain valid. Painting can void warranties and is not a lease option.
- You don’t have to wrap your entire car; you can just do your hood, roof, mirrors, stripes, etc.
- You can restore the car to its original color by removing the wrap.
- Vinyl car wraps come in many colors and can have matte, semi-gloss, gloss, brushed steel, carbon fiber, matte metallic, chrome, and even leather-like finishes.
Product Tags:
|
|
Polymeric Calendered Air Bubble Free Vinyl Wrap ultra gloss green car wrap Images
|
